Crustal and upper mantle seismic structure of the Australian Plate, South Island, New Zealand   总被引：7，自引：0，他引：7  

Anne Melhuish  W. Steven Holbrook  Fred Davey  David A. Okaya  Tim Stern   《Tectonophysics》2005,395(1-2):113-135

Seismic reflection and refraction data were collected west of New Zealand's South Island parallel to the Pacific–Australian Plate boundary. The obliquely convergent plate boundary is marked at the surface by the Alpine Fault, which juxtaposes continental crust of each plate. The data are used to study the crustal and uppermost mantle structure and provide a link between other seismic transects which cross the plate boundary. Arrival times of wide-angle reflected and refracted events from 13 recording stations are used to construct a 380-km long crustal velocity model. The model shows that, beneath a 2–4-km thick sedimentary veneer, the crust consists of two layers. The upper layer velocities increase from 5.4–5.9 km/s at the top of the layer to 6.3 km/s at the base of the layer. The base of the layer is mainly about 20 km deep but deepens to 25 km at its southern end. The lower layer velocities range from 6.3 to 7.1 km/s, and are commonly around 6.5 km/s at the top of the layer and 6.7 km/s at the base. Beneath the lower layer, the model has velocities of 8.2–8.5 km/s, typical of mantle material. The Mohorovicic discontinuity (Moho) therefore lies at the base of the second layer. It is at a depth of around 30 km but shallows over the south–central third of the profile to about 26 km, possibly associated with a southwest dipping detachment fault. The high, variable sub-Moho velocities of 8.2 km/s to 8.5 km/s are inferred to result from strong upper mantle anisotropy. Multichannel seismic reflection data cover about 220 km of the southern part of the modelled section. Beneath the well-layered Oligocene to recent sedimentary section, the crustal section is broadly divided into two zones, which correspond to the two layers of the velocity model. The upper layer (down to about 7–9 s two-way travel time) has few reflections. The lower layer (down to about 11 s two-way time) contains many strong, subparallel reflections. The base of this reflective zone is the Moho. Bi-vergent dipping reflective zones within this lower crustal layer are interpreted as interwedging structures common in areas of crustal shortening. These structures and the strong northeast dipping reflections beneath the Moho towards the north end of the (MCS) line are interpreted to be caused by Paleozoic north-dipping subduction and terrane collision at the margin of Gondwana. Deeper mantle reflections with variable dip are observed on the wide-angle gathers. Travel-time modelling of these events by ray-tracing through the established velocity model indicates depths of 50–110 km for these events. They show little coherence in dip and may be caused side-swipe from the adjacent crustal root under the Southern Alps or from the upper mantle density anomalies inferred from teleseismic data under the crustal root.  相似文献   

From the geological to the numerical model in the analysis of gravity-induced slope deformations: An example from the Central Apennines (Italy)     

A. Maffei  S. Martino  A. Prestininzi 《Engineering Geology》2005,78(3-4):215-236

This paper presents the findings from a study on gravity-induced slope deformations along the northern slope of Mt. Nuria (Rieti-Italy). The slope extends from the village of Pendenza to the San Vittorino plain and hosts the Peschiera River springs, i.e. the most important springs of the Central Apennines (average discharge: about 18 m³/s).

Detailed geological-geomorphological and geomechanical surveys, supported by a site stress-strain monitoring system and laboratory tests, led us to define the main evolutionary features of the studied phenomena. Based on the collected data, a “geological-evolutionary model” was developed with a view to identifying a spatio-temporal correlation between relief forms, jointing of the rock mass and its stress conditions. The geological-evolutionary model was expected to improve numerical simulations and to test our assumptions.

The numerical model also allowed us to simulate changes in the stress-strain conditions of the rock mass and correlate them with jointing, seepage, as well as with site-detected and site-monitored forms and deformations. In particular, significant relations between seepage, tensile stresses within the rock mass, karst solution and collapse of cavities were identified.  相似文献   

成熟勘探矿集区新一轮找矿：勘查战略创新及铜陵矿集区找矿实例   总被引：7，自引：0，他引：7       下载免费PDF全文

刘亮明吕俊武  彭省临王国平方维萱  邵拥军 《地质论评》2005,51(3):325-333

成熟勘探的矿集区非常有必要开展新一轮的找矿，但矿床模式的局限和大埋藏深度等困难制约了这些地区的预测性找矿发现。促进其预测性找矿发现的关键战略包括：勘查模型的创新、勘查技术的创新和各种信息的综合集成预测。勘查模型的创新必须包含基于地球动力学剖析的新成矿概念，动力学数值模拟是有效的创新手段之一；勘查技术创新的主要目的是加大探测深度和提高探测与解释的准确性，必须以详细可靠的地质资料为基础；综合信息集成是利用GIS和知识驱动及数据驱动的方法充分提取各种数据中的有用信息，集成为更加可靠的预测图。在这种思想的指导下，我们在铜陵凤凰山矿田进行了预测和勘查，并成功地发现了深部的隐伏矿床。  相似文献   

深直井旋转钻柱空转功率消耗的数学建模          下载免费PDF全文

吕建国  陈敏  刘宝林  肖天鹏 《探矿工程》2005,32(10):42-44

通过对深井旋转钻柱空转功率消耗因素的分析，考虑空转时离心力作用在井壁上引起的摩擦力导致的功率消耗，并将钻井液视为牛顿液体，运用柱坐标系建立了旋转钻柱在深井作业条件下空转功率消耗的分析模型。综合考虑空转功率与钻柱旋转的角速度、钻柱与井眼结构参数、钻井液粘度系数等因素间的关系，即旋转钻柱运动过程中的离心力和钻井液作用在钻柱上的剪切应力对功率的影响，建立了更加符合实际工况的数学模型。  相似文献   

鄂北工区钻头型号及钻井参数的优化          下载免费PDF全文

李德红 《探矿工程》2005,32(8):50-54

通过对近年来鄂北工区所施工井的钻井资料进行分析、对比，优选出了适合于各区块、各井段的钻头型号和钻井参数，提高了机械钻速，缩短了钻井周期，使鄂北工区的钻井技术上了一个新的台阶，加速了鄂北气田的建设。  相似文献   

利用卫星遥感资料反演感热和潜热通量的研究综述     

王开存  周秀骥  李维亮  刘晶淼  王普才 《地球科学进展》2005,20(1):42-048

区域平均感热和潜热通量是气象、水文、生态模式中的关键物理因子，卫星遥感反演为观测区域平均感热和潜热通量提供了可能。对利用卫星遥感资料反演地气通量的方法进行了总结和评述。首先描述了现在常用的反演方法，分析了方法中的各种假定对反演结果的影响，并对不同的模式反演结果进行了比较。还指出了评价卫星反演通量的精度时需要注意的问题。最后对该领域内现存的问题与发展方向进行探讨。  相似文献   

On size and boundary effects in scaled model blasts spatial problems     

H. P. Rossmanith  K. Uenishi 《Fragblast: International Journal for Blasting and Fragmentation》2005,9(3):139-174

This paper addresses size and boundary effects on wave propagation, fracture pattern development and fragmentation in small scale laboratory-size specimens for model blasting. Small block type specimens are centre-line loaded by linear explosive charges and supersonically detonated. Using elastic wave propagation theory and fracture mechanics it is shown that the type of boundary conditions which prevail at the outer boundary of the cylinder control the extension of bore-hole cracking and fragmentation within the body of the cylinder. In the case of a composite block where a cylindrical core of different material is embedded, the level of fracturing and fragmentation is controlled by the separation of the interface which in turn depends on the relative dimensions of the core and the block. The most important parameter is the ratio between the length of the pulse (space-wise or time-wise) and the characteristic dimensions of the models, i.e. in this case the dimensions of the core and the mantel. Stress wave superposition effects occur in the corner sections of the mantel. Theoretical results are in good agreement with recent experimental findings.  相似文献   

Quantitative assessment on the influence of heavy rainfall on the crystalline schist landslide by monitoring system -case study on Zentoku landslide, Japan   总被引：2，自引：1，他引：2  

Yong Hong  Hiromasa Hiura  Kazuo Shino  Kyoji Sassa  Hiroshi Fukuoka 《Landslides》2005,2(1):31-41

On Shikoku Island, which is one of the four main islands of Japan, a large number of large-scale crystalline schist landslides have been revealed and are being monitored by an observation system. Seasonal heavy rainfall is the most active meteorological factor that can threaten the stability of this kind of site-specific landslide. In this paper, on the basis of the study of the rainfall-related behavior of a typical crystalline schist landslide, the Zentoku landslide, by analyzing the precisely and continuously observed piezometric and movement data, a method was developed to quantitatively assess the effect of heavy rainfall on a large-scale landslide. The results indicated that heavy rainfall-induced landslide displacement shows good correlation with the variation of groundwater levels. Variations of groundwater level have been simulated with the use of a tank model. The simulation using this model permits the change in water levels for future rainfall events to be predicted. By combining the predicted results with the empirical relation between displacements and water levels, rainfall-induced landslide movement during extreme rainfall events can be estimated in advance. The effect of heavy rainfall on sliding behavior can be quantified in terms of the change in displacement. Thus warning information or advisories for the local residents can be provided.  相似文献   

Atomistic simulation of Mg2SiO4 and Mg2GeO4 spinels: a new model     

M. Blanchard  K. Wright  J. D. Gale 《Physics and Chemistry of Minerals》2005,32(5-6):332-338

  相似文献   

Development of an integrated conceptual model for the rational management of the transboundary Nestos River, Greece   总被引：1，自引：0，他引：1  

C. Petalas  F. Pliakas  I. Diamantis  A. Kallioras 《Environmental Geology》2005,48(7):941-954

This paper provides a detailed analysis of the geologic, hydrologic and hydrogeologic characteristics of Nestos River basin, which is formed within the Greek mountainous part of the river. The quantitative analysis was mainly based on the data of the river flow in different gauging points across the rivercourse as well as on the data of groundwater discharge from karst springs of the mountainous area while important conclusions were made regarding the hydraulic connection between the surface waters of the river and the groundwater of the karst aquifers of the basin. The qualitative analysis has shown that the quality of both surface waters and groundwaters of the investigated basin is high, whereas, no sources of contamination were indicated during this research. The possible effects of the two large dams of Platanovrisi and Thesavros are also analysed as they strongly affect the quantitative and qualitative regime of the river delta.  相似文献